Log assembly method

The specified process of the intermediate inspection in the log structure method and the designation of the designated process will be operated as follows.

1. Buildings of the log structure method are separate table 4 (1) of Article 17 of the City Enforcement Regulations "Designation of Specific Processes" "A wooden building with a floor number of 1 or 2 and a total floor area of 500 square meters or less Buildings ".

2. Specific process
   When the total frame tension is completed (when the log frame tension is completed).

3. Designation of the specified process
   At the construction stage of a specific process, inspection of dags, etc. is not visible, so an additional designated process is specified in the first stage of the specific process. (Based on Article 17-4, (6) of the City Enforcement Detailed Regulations)
   The designated process shall be when the strength wall is assembled by about 1/2 after the foundation work is completed.

4. Implementation method
   At the time of implementation, when the designation of a specific process and a certificate of confirmation are issued at the examination stage, the building owner will be notified of the designation of the designated process.

5. Operation start date
   Effective from September 1, 2004.

For technical standards, please refer to Notification 411 of the Ministry of Land, Infrastructure, Transport and Tourism in 2002.